Hi,
mit der original .ini startet doorpi, nach den Änderungen in der ini leider nicht mehr, finde den Fehler einfach nicht.
Habe einen Raspberry Pi2 mit PiFace und Cam-Modul.
Auf gleichem Raspberry läuft Asterisk.
Auf Smartphone ist ELCOM Videofon installiert, und hat Verbindung zu RASPBX. Auch der Videostream ist aktiv.
Anbei meine INI, TRACE-LOG im Anhang. Vielleicht kann mir hier jemand helfen.
Code: doorpi.ini
[AREA_installer]
.* =
#========= User rights ==========#
[User]
door = pi
[Group]
administrators = door
[WritePermission]
administrators = installer
[ReadPermission]
administrators = installer
[AdminNumbers]
**301 = active
[DoorPi]
base_path = /usr/local/etc/DoorPi
eventlog = !BASEPATH!/conf/eventlog.db
is_alive_led =
last_snapshot =
snapshot_path =
[DoorPiWeb]
indexfile = index.html
ip =
loginfile = login.html
online_fallback = http://motom001.github.io/DoorPiWeb
port = 80
public = AREA_public
www = !BASEPATH!/../DoorPiWeb
[EVENT_OnStartup]
10 = sleep:1
[SIP-Phone]
firewallpolicy = PolicyNoFirewall
audio_codecs = PCMA,PCMU
call_timeout = 15
capture_device = ALSA: USB Audio Device
dialtone = !BASEPATH!/media/ShortDialTone.wav
dialtone_renew_every_start = False
dialtone_volume = 35
echo_cancellation_enabled = False
identity = DoorPi
local_port = 5060
max_call_time = 120
playback_device = ALSA: USB Audio Device
record_while_dialing = False
records = !BASEPATH!/records/%Y-%m-%d_%H-%M-%S.wav
sipphonetyp = linphone
sipserver_password = 305Beispiel
sipserver_realm = 192.168.0.150
sipserver_server = 192.168.0.150
sipserver_username = 305
stun_server =
ua.max_calls = 2
video_codecs = VP8
video_device = V4L2: /dev/video0
video_display_enabled = False
video_size = vga
[keyboards]
onboardpins = piface
[onboardpins_InputPins]
1 = call:**301
2 = call:**301
[onboardpins_OutputPins]
[DTMF]
[onboardpins_keyboard]
bouncetime = 200
mode = BOARD
polarity = 0
pressed_on_keydown = False
pull_up_down = PUD_DOWN
Alles anzeigen
Danke, Gruß Chris