Oooh, kannst Du mir bitte gerade sagen, wo die trace steht. Alles so umständlich bei Linux
Danke & LG
Oooh, kannst Du mir bitte gerade sagen, wo die trace steht. Alles so umständlich bei Linux
Danke & LG
Telefoniegeräte
// Ich habe mal vorsorglich Deinen Anhang gelöscht, nicht das dich dann noch jemand anruft. \\
Ok, sorry da bin ich nicht so firm. Hoffe so passt es.
Danke & LG,
Christian
[AREA_installer]
.* =
[DoorPi]
base_path = /usr/local/etc/DoorPi
eventlog = !BASEPATH!/conf/eventlog.db
is_alive_led = blinking_led
last_snapshot =
snapshot_path =
[DoorPiWeb]
indexfile = index.html
ip =
loginfile = login.html
online_fallback = http://motom001.github.io/DoorPiWeb
port = 80
public = AREA_public
www = !BASEPATH!/../DoorPiWeb
[EVENT_OnStartup]
10 = sleep:1
[Group]
administrator = door
[SIP-Phone]
firewallpolicy = PolicyNoFirewall
audio_codecs = PCMA,PCMU
call_timeout = 30
capture_device = ALSA: default device
dialtone = !BASEPATH!/media/ShortDialTone.wav
dialtone_renew_every_start = False
dialtone_volume = 35
echo_cancellation_enabled = False
identity = DoorPi
local_port = 5060
max_call_time = 900
playback_device = USB PnP Sounddevice
record_while_dialing = False
records = !BASEPATH!/records/%Y-%m-%d_%H-%M-%S.wav
sipphonetyp = linphone
sipserver_password = 9010
sipserver_realm = fritz.box
sipserver_server = fritz.box
sipserver_username = 620
stun_server =
ua.max_calls = 2
video_codecs = VP8
video_device = StaticImage: Static picture
video_display_enabled = False
video_size = vga
[User]
door = pi
[WritePermission]
administrator = installer
[keyboards]
dummy = dummy
Alles anzeigen
Hallo Zusammen,
mittlerweile ist auf meinem raspberry 3 doorpi, der mjpg streamer und die soundkarte erfolgreich eingerichtet. Leider kann ich von den Fritz Mobilteilen keine Verbindung aufbauen. Fehlermeldung: Vermittlungsfehler
Denke mal, dass ich iorgendwas in der Doorpi Konfiguration falsch gemacht habe, aber ich komme nicht dahinter.
Wie sieht es denn mit Port- Freigabe in der FB aus. Default (Doorpi) ist 5060). Laut Fritz ist dieser Port ausschließlich für Fritz Mobilteile reserviert. Was muß man hier ändern?
Sicherheitshalber poste ich mal die doorpi Config (Web- Ansicht):
how 102550100 entries
Search:
SchlüsselWertVorgabeBeschreibungAREA_installerDoorPiDoorPiWebEVENT_OnStartupGroupkeyboardsSIP-PhoneUserWritePermission
.* | text | beschreibung | |
is_alive_led | blinking_led | text | beschreibung |
last_snapshot | text | beschreibung | |
snapshot_path | text | beschreibung | |
base_path | /usr/local/etc/DoorPi | text | beschreibung |
eventlog | !BASEPATH!/conf/eventlog.db | text | beschreibung |
loginfile | login.html | text | beschreibung |
www | !BASEPATH!/../DoorPiWeb | text | beschreibung |
ip | text | beschreibung | |
indexfile | index.html | text | beschreibung |
public | AREA_public | text | beschreibung |
online_fallback | http://motom001.github.io/DoorPiWeb | text | beschreibung |
port | 80 | text | beschreibung |
10 | sleep:1 | text | beschreibung |
administrator | door | text | beschreibung |
dummy | dummy | text | beschreibung |
sipserver_username | **620 | text | beschreibung |
echo_cancellation_enabled | False | text | beschreibung |
stun_server | text | beschreibung | |
FirewallPolicy | PolicyNoFirewall | text | beschreibung |
sipserver_server | fritz.box | text | beschreibung |
dialtone | !BASEPATH!/media/ShortDialTone.wav | text | beschreibung |
local_port | 5060 | text | beschreibung |
video_codecs | VP8 | text | beschreibung |
record_while_dialing | False | text | beschreibung |
playback_device | USB PnP Sounddevice | text | beschreibung |
call_timeout | 30 | text | beschreibung |
firewallpolicy | PolicyNoFirewall | text | beschreibung |
video_size | vga | text | beschreibung |
sipphonetyp | linphone | text | beschreibung |
sipserver_password | = wie unter Fritz IP Türstelle vergeben | text | beschreibung |
ua.max_calls | 2 | text | beschreibung |
video_device | StaticImage: Static picture | text | beschreibung |
video_display_enabled | False | text | beschreibung |
capture_device | ALSA: default device | text | beschreibung |
dialtone_renew_every_start | False | text | beschreibung |
sipserver_realm | fritz.box | text | beschreibung |
identity | DoorPi | text | beschreibung |
records | !BASEPATH!/records/%Y-%m-%d_%H-%M-%S.wav | text | beschreibung |
audio_codecs | PCMA,PCMU | text | beschreibung |
dialtone_volume | 35 | text | beschreibung |
max_call_time | 900 | text | beschreibung |
door | pi | text | beschreibung |
administrator | installer | text | beschreibung |
Showing 1 to 44
So jetzt funzt der Streamer.
Nach ewig langem hin und her in der boot config etc. hab ich mich nun für den "kompletten Reset" entschieden: Mit Erfolg
Hoffe die weiteren Schritte machen weniger Ärger
Weiß der Teufel woran es nun lag.
jetzt kommt noch kurz nach dem Editier-Versuch:
E325: ATTENTION
Found a swap file by the name "/.boot.config.txt.swp"
owned by: root dated: Wed Jun 1 21:13:44 2016
file name: /boot.config.txt
modified: YES
user name: root host name: raspberrypi
process ID: 9054
While opening file "/boot.config.txt"
(1) Another program may be editing the same file. If this is the case,
be careful not to end up with two different instances of the same
file when making changes. Quit, or continue with caution.
(2) An edit session for this file crashed.
If this is the case, use ":recover" or "vim -r /boot.config.txt"
to recover the changes (see ":help recovery").
If you did this already, delete the swap file "/.boot.config.txt.swp"
to avoid this message.
"/boot.config.txt" [New File]
Press ENTER or type command to continue
Mal was anderes: Habe eben versucht in den boot .txt die befehle
start_file=start_x.elf
fixup_file=fixup_x.dat
einzutragen.
Nun gibt es ein file config.txt.save und ein file config.txt.save1. Letzteres hat die beiden Befehle an letzer Stelle.
Beim versuch $ sudo vi /boot.config.txt zu öffnen, kommt nun ein komplett leeres fenster. Nehme also an, der Inhalt von bootconfig.save1 müsste an dessen Stelle stehen. Leider kann ich nichts umbenennen oder löschen.
Was kann ich denn da bitte machen?
Ne. leider nur USb, keine CSI.
For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
start_x=1
gpu_mem=128
Alles anzeigen
// Damit die Beiträge etwas übersichtlicher sind bitte in Code einbetten, danke \\
Komischerweise finde ich in boot.txt auch nix bzgl. Kamera.
Jep, die seite kenn ich auch. Ist richtig installiert. rote Led brennt!
So rpi update erledigt. Fehlermeldung identisch. Bin ehrlichgesagt yiemlich ratlos
Was hältst Du von einem rpi-update? risiko?
Hatte ich schon mal vor der eigentlichen Doorpi Installation gemacht. Eben nochmal durchgeführt, bei raspistill -o /tmp/test.jpg gleiche Fehlermeldung.
Hallo Andreas,
danke für Deine superschnelle Antwort. Denke es liegt am Kernel. Hier funzt was nicht so wie es sollte. Hatte ja wie gepostet urspünglich die USB Webcam dran. Led leuchtete auch, aber softwareseitig ging nix.
Ich habe bis auf Doorpi/ linphone nichts laufen.
Scheint etwas komplizierter zu sein
LG Christian
Hallo Andreas,
mittlerweile ist die Kamera eingetroffen und ich folge gerade Deiner Beschreibung zur Installation des mjpg Streamers.
Leider bekomme ich bei $ raspistill -o /tmp/test.jpg folgende Fehlermeldung:
mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera component couldn't be enabled
mmal: main: Failed to create camera component
mmal: Failed to run camera app. Please check for firmware updates
Recherche brachte mich auf nötige Änderungen im boot/config/txt file. Hier bin ich etwas vorsichtiger und wollte erst nochmal nach Rat fragen.
Ich verwende RaspberryPI3 Jessie akt. Version, kein NOOBS.
Danke schon mal und beste Grüße,
Christian
Natürlich auch von mir! Und nochmals danke für die Aufnahme und Unterstützung hier.
Feiert ordentlich,
Christian
Super, danke für die schnelle Antwort. Sollte jetzt passen, wie ich das sehe. Gebe mir künftig auch mehr Mühe.
Schönen Abend,
Christian
Hallo Andreas, darf man fragen, wie Du vom CAT auf die CSI Flachbandkabel kommst? Stecker-Typ, Klemmtechnik? Dann könnte man ja auch mit anderen Kabeln recht gut arbeiten. Zusammenbasteln mit löten etc. gefällt mir nicht so.