Beiträge von brunh

    You can not connect ethernet to the zero without an adapter. You can use NanoPi Duo. Firmware Doorpi with small edits suitable. I can share my firmware, just modified something, use an internal microphone input port and dynamic lighting for apa102 leds.
    Or look for an adapter whose matching transformer is not integrated in the rj45, but it costs separately. then it is possible to remove the plug and solder in its place the wires.

    This board does not connect directly, and it is not needed.
    You only have two buttons: the exit and the bell.
    Port for control door lock, write in doorpi.ini, for example PA13, and the buttons in the file
    How it is specifically connected to the forum is detailed, the connection schemes to the relay, and to the buttons, they are exactly the same as the Raspberry.

    Sorry for the vague instructions.

    Pressing the buttons generates a record in the file to a virtual/input that is processed according to the rules of doorpi.ini

    Here is the error: [keyboards] io = gpio
    Inputs GPIO PC4 and PC7 are assigned to the file can change on your own.
    1) armbian img
    2) install doorpillars.
    3) changing the file here: /usr/local/lib/python2.7/dist-packages/doorpillars./keyboard
    4) install pyA20
    5) redacted doorpi.ini different name because the gpio pins OrangePi
    Earn on output ports starting at PA, for example PA13
    13 = Door

    reset_input = true
    base_path_input = !BASEPATH!/virtual/inputs/
    base_path_output = !BASEPATH!/virtual/outputs/

    5888 = out:Door,1,0,3
    56 = call:804

    The connected MFRC522 took away:,415.0.html change to attached, will be read with the reader and gpio inputs. Can cut reader and to make only the gpio.

    Sound 3.5 mm as output:
    apt-get install sox

    cat << _EOF_ > /etc/asound.conf
    pcm.!default {
    type hw
    card 0

    ctl.!default {
    type hw
    card 0

    amixer set-c 0 'Audio lineout' unmute

    see this file, include rs522 and buttons.

    ~# cat /proc/asound/cards | grep ]: | sed 's/.* - //'
    HP Webcam HD 2300

    changed attribute in doorpi.ini but the result of the microphone is not changed.
    capture_device = ALSA: audiocodec
    capture_device = ALSA: HP Webcam HD 2300

    happened: I edited

    Please indicate location of Linphone file, which has a main function with selection of a sound source, since it is required to set the usb microphone manually in the OrangePi
    ps doorpi/sipphone/
    what to write, if interesant cart 2:
    # arecord -l
    **** List of CAPTURE Hardware Devices ****
    card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 []
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 []
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: H2300 [HP Webcam HD 2300], device 0: USB Audio [USB Audio]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    Hi Emil,
    yes, i solved it.
    by adding an event in doorpi.ini, that has to play the sound.

    i was looking through your doorpi.ini as well. and didn't understand what means string:
    36 = 36

    how it should work? what is a logic of that?

    dear colleagues!
    unfortunately i couldn't find how i can add some sound that will accompany a opening of the door, could you please advise me how to do it? e.g. i open the door by using rfid card and i'd like to hear some special sound.